Machining

The conventional horizontal lathe is used for the machining of internal and external surfaces of a cylinder or conic surfaces etc. It is capable to turn small shafts, sleeves and plates, and has a high level of precision cutting ability for a single workpiece or large batches. Jermac Precision Inc. has 2 Microweily Ø20 x 48” with a capacity of 2500 rpm, and 1 Microweily Ø26 x 72” with a capacity of 1200 rpm.

 

 

 

The vertical machining center (CNC) is used in creating parts and die/molds that matter with precision, accuracy, repeatability and surface finishes that virtually eliminate bench work. Jermac Precision Inc. has a Fadal VMC 2040 with a capacity of 20 x 20 x 40 10000 rpm, a Fadal VMC 15XT with a capacity of 20 x 15 x 30 7500 rpm, a Fadal VMC 3060 with a capacity of 20 x 30 x 60 1000 rpm, a DNM-500 with a capacity of 20 x 20 x 40 12000 rpm, a DMV-500 with a capacity of 20 x 20 x 40 10000 rpm, a DWM-500 with a capacity of 20 x 20 x 40 12000 rpm, a MV 4040LS with a capacity of 20 x 20 x 40 15000 rpm, and a DNM 500HS with a capacity of 20 x 20 x 40 15000 rpm.

 

 

 

The CNC Lathe is used for precision machining of relatively hard materials. The machining process removes material from a rotating workpiece via the (typically linear) movements of various cutting tools, such as tool bits and drill bits. Jermac Precision Inc. has a Puma 400M with a capacity of Ø30 max, 2000 rpm with live tooling and a Okuma with a capacity of Ø24 max , 2200 rpm (12x tools).

 

 

 

EDM (Electrical discharge machining) is a manufacturing process used to achieve a desired shape using electrical discharges (sparks). Material is removed from the metal work piece by a series of rapidly recurring current discharges between two electrodes, separated by a dielectric liquid and subjected to an electric voltage. Jermac Precision Inc. has a wire EDM Sodick AQ537L with a capacity of 20 x 30 x 12 thick, a conventional EDM Creator CJ – 340 with a capacity of 25.5 x 12.6 x 12 height, and a conventional Creator CJ-230 with a capacity of 23.6 x 11.8 x 12 height.

 

 

 

The conventional vertical milling machine uses a rotating milling cutter to produce machined surfaces by progressively removing material from a work piece. The vertical milling machine can also function like a drill press because the spindle is perpendicular to the table and can be lowered into the work piece.

 

 

 

Jermac Precision Inc. has 3 Ex-cell-0 with a capacity of 12 x 24 4000 rpm, and 1 Top Well with a capacity of 15 x 26 3800 rpm.